Store

Store Home » All Tankless Water Heaters

All Tankless Water Heaters

 

Stop paying sky-high water heating bills! The Stiebel Eltron Mini 4 tankless electric water heater is stylish, reliable, and brings impressive performance in one compact package. Designed for installation at the point of use, the Mini 4 instantaneously heats water as it enters the unit and provides an unlimited supply of hot water without any heat loss.The Stiebel Eltron Mini 4 tankless electric water heater accommodates 208 volts as well as 220-240 volts and combines meticulous German engineering with the best available materials to ensure years of hassle-free service. Because the Mini 4 weighs less than four pounds, its appealing design can be mounted in plain sight and is a great space-saver. It's also perfect for bathroom sinks, kitchen sinks, laundry areas, or even boats and RVs.Included with the Mini 4 is a 0.5 GPM pressure compensating flow reducer / aerator that fits most faucets -- no drains or circulating pumps are needed! For easy operation, this tankless electric water heater is controlled by a simple control switch. In terms of safety, the Mini 4 also comes with a safety high-limit with automatic reset.

$149.99

Details

Throw away your heater tank and start saving up to 20 percent on your water heating bill with the Stiebel Eltron Mini 6 tankless electric water heater! Designed for installation at the point-of-use, this ultra-compact tankless electric water heater weighs less than four pounds and is sleek enough to be mounted in plain sight in your bathroom, kitchen, boat, RV, or cabin! In addition to its small size and appealing design, the Stiebel Eltron Mini 6 heats water instantaneously as it flows through the unit. As a result, standby heat losses are completed eliminated when compared to conventional water heating tanks. All you get is an unlimited supply of hot water whenever you may need it. The Mini 6 also features efficient heating elements that are controlled by a simple control switch. German-engineering and the best-quality materials ensure years of hassle-free use. Moreover, this tankless electric water heater comes equipped with a safety high-limit with automatic reset.

$149.99

Details

"Rheem RTG20038 Recess Box . For use with RTG-74X and GT199X outdoor tankless models only. This new accessory enhances an outdoor installation by protecting the tankless unit from damage and tampering. It also provides additional protection from extreme weather. Rough-in dimensions: 41"" high x 17"" wide x 10"" deep"

$149.99

Details

The Stiebel Eltron Mini? tankless water heaters are designed for installation at the point-of-use. The Mini? heats water instantaneously as it flows through the unit. Stand-by heat-losses are completely eliminated. The efficient heating elements are controlled by a simple flow switch. Additionally, all Mini? water heaters are equipped with a safety high-limit with automatic reset. The combination of meticulous German engineering and the best available materials ensure that every Mini? is of the highest quality and designed for many years of trouble-free service. Nobody can compare with our exceptional reliability record and customer support services! The Mini? 3, and Mini? 4 models ship with a 0.5 GPM pressure compensating flow reducer / aerator that fits most faucets. Flow controls and faucet aerators are highly recommended in conjunction with tankless water heaters. No pressure relief valve*, drains, or circulating pumps are needed. The Stiebel Eltron Mini? tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial / industrial setting: Office Buildings, Gas Stations, Stores, Schools, Malls, Hotels / Motels, Warehouses, Commercial Condominiums, Restaurants, Manufacturing Facilities. In a residential setting, they are suited for the following applications: Bathroom Sinks, Kitchen Sinks, Laundry Areas, Small Cabins, Boats / RVs. Heating Capacity: 36° F Rise @ 0.66 Gpm 27° F Rise @ 0.75 Gpm 20° F Rise @ 1.00 Gpm 16° F Rise @ 1.25 Gpm 13° F Rise @ 1.50 Gpm

$149.00

Details

The Stiebel Mini6 Electric Point-of-Use Tankless Water Heater is designed for installation at the point-of-use. The Mini6 heats water instantaneously as it flows through the unit. Stand-by heat-losses are completely eliminated. The efficient heating elements are controlled by a simple flow switch. Additionally, all Mini(TM) water heaters are equipped with a safety high-limit with automatic reset. The combination of meticulous German engineering and the best available materials ensure that every Mini(TM) is of the highest quality and designed for many years of trouble-free service. Nobody can compare with our exceptional reliability record and customer support services! The Stiebel Eltron Mini(TM) tankless water heaters are ideal for restrooms or kitchenettes in an office or commercial / industrial setting: Office Buildings, Gas Stations, Stores, Schools, Malls, Hotels / Motels, Warehouses, Commercial Condominiums, Restaurants, Manufacturing Facilities. In a residential setting, they are suited for the following applications: Bathroom Sinks, Kitchen Sinks, Laundry Areas, Small Cabins, Boats / RVs Key Features Include: 40 degree rise at .95 gpm # of Applications: Powers one sink Temperature Increase / Gallons per Minute Relationship: 40° F rise @ 0.95 gpm 35° F rise @ 1.1 gpm 30° F rise @ 1.3 gpm 25° F rise @ 1.6 gpm 20° F rise @ 2.00 gpm

$149.00

Details

ProTech Systems FasNSeal FSVPK3 3" Variable Pitch Flashing Kit - Flat to 9/12 (300661) FasNSeal

$148.58

Details

"Rheem RTG20002W Roof Jack Support System for Vertical Termination on Flat Roof. Roof jack support system for vertical termination on flat roof. All Rheem tankless water heater venting material is made from Category III stainless steel for durability and safety. All components are UL 1738 certified. Manufactured using AL29-4C advanced ferritic stainless steel with unmatched corrosion resistance for use with condensing furnaces and boilers. For 4"" tankless vent"

$139.99

Details

The Z-Flex 4 Stainless Steel Horizontal Power Vent Kit (model: HVKIT7) is our most popular horizontal vent kit for the Rheem RTG74PV and GT199PV model tankless water heater installation. For quick and easy side wall vent terminations. This Kit Includes: (1) - 4 Z-Flex Gas Vent Universal Appliance Adapter (1) - Z-Flex 4 x 90 Degree Elbow (1) - Z-Flex 4 Adjustable Vent Pipe that can be adjusted from 10 inches to 18 inches in length (1) - Z-Flex 4 Wall Thimble (AL29-4C) (1) - Z-Flex 4 Vent Termination Coupling w/ Screen (prevents outside debris from entering your venting pipe)

$139.95

Details

PowerStar AE3.4-RE Factory-Reconditioned AE3.4 Point-of-Use Electric Tankless Water Heater. 99% efficient. 5-year warranty on heat exchanger - 1 year on parts. Saves space. Installs vertically or horizontally (Model AE12 only installs horizontally). All models must be hardwired. Solid copper heat exchanger, copper-sheathed elements and tough plastic housing. High/low kW settings possible within most models. No temperature/pressure relieve valve necessary (check local codes). Model AE12 has thermostatic adjustable control., PowerStar point-of-use water heaters are not designed to accept preheated water

$139.00

Details

PowerStar AE7.2-RE Factory-Reconditioned AE7.2 Point-of-Use Electric Tankless Water Heater. 99% efficient. 5-year warranty on heat exchanger - 1 year on parts. Saves space. Installs vertically or horizontally (Model AE12 only installs horizontally). All models must be hardwired. Solid copper heat exchanger, copper-sheathed elements and tough plastic housing. High/low kW settings possible within most models. No temperature/pressure relieve valve necessary (check local codes). Model AE12 has thermostatic adjustable control., PowerStar point-of-use water heaters are not designed to accept preheated water

$139.00

Details

PowerStar AE9.5-RE Factory-Reconditioned AE9.5 Point-of-Use Electric Tankless Water Heater. 99% efficient. 5-year warranty on heat exchanger - 1 year on parts. Saves space. Installs vertically or horizontally (Model AE12 only installs horizontally). All models must be hardwired. Solid copper heat exchanger, copper-sheathed elements and tough plastic housing. High/low kW settings possible within most models. No temperature/pressure relieve valve necessary (check local codes). Model AE12 has thermostatic adjustable control., PowerStar point-of-use water heaters are not designed to accept preheated water

$139.00

Details

Our value combination kit (model: GCNTKIT) is the perfect solution for getting started with installing your new gas tankless hot water heater. Featuring the BrassCraft 7/8" O.D. (3/4" I.D.) 3/4" F.I.P. x 3/4" M.I.P. 36" long stainless steel gas connector is known for superior quality and reliable performance. BrassCraft combines superior corrosion resistance with ultra-flexible, high-flow stainless steel connectors to provide the industry's most advanced gas connector for large demand appliances. BrassCraft's large diameter gas connectors are specifically engineered for gas appliances with large demand BTU requirements (up to 290,900 BTU/Hr) such as tankless and commercial water heaters, boilers, furnaces, manufacturered housing, and pool heaters. Factory assembled to eliminate on-site pipe cutting, threading and assembly, our large diameter connector increases efficiency of appliance installation saving time and money. Superior Corrosion Resistance BrassCraft's proprietary ProCoat coating resists corrosion from harsh household cleaning, plumbing repair and masonry products such as bleach, ammonia, solder flux and muriatic acid. ProCoat coating helps protect the stainless steel core from pinhole leaks and deterioration resulting from prolonged exposure to residue and vapors from these products. Approved for indoor and outdoor use, the ProCoat coating resists the harsh effects of UV rays and salt. Also, the tankless water heater connector kit contains pieces required for gas tankless water heater installations. You can buy them together as this kit or choose to buy them separately at a local hardware store. Kit Includes: Swivel FIP connection for quick installation (1) BrassCraft 7/8 O.D. (3/4 I.D.) 3/4 F.I.P. x 3/4 M.I.P. 36 long stainless steel gas connector Sweat or FIP supply connection (2)- 3/4 full port ball valves Integrated all brass tee for pressure valve Pressure valve included 1/4 turn drain valves for drainage/flushing purposes.

$139.00

Details